New Revolutionary, Patent-Pending Technology
That Will Forever Change Our Industry!

Customer Praise the Power of RapidRun™!

“We purchased RapidRun™ HD15 (UXGA) with Break-Away Flying Leads for Crossway Church. This was used for a permanent install run from our display computers in the front of house position to our rear-screen projector setup in the front of the sanctuary. The cable has performed incredibly well as it is a long run and there are no typical cable-length artifacts visible in the image. The quick termination feature meant that I could go with a high quality cable without having to terminate the ends manually. It also gives me future proofing. If we move or change projectors or display equipment, I can change the termination on either end of the cable without having to lose length or manually install different connectors.” - Tom B., Tennessee

“I purchased RapidRun to connect a medical imaging system remote slave monitor at 75 feet. The RapidRun system was ideal for our application. One end needed to be terminated as VGA and the other with 5-BNC leads. The cables had to be pulled through 2 inch conduit at 75 feet and into a cabinet. This system was much easier than pulling non-terminated cables and then terminating them. The time saved on installation was very important with a deadline for patient critical medical imaging equipment. RapidRun was exactly what we needed to complete the project in a timely fashion.” - Tony H., Florida

"We used RapidRun in our home to run video distribution to two rooms from a component switcher in a whole home audio/video distribution system. It has performed flawlessly and it saved hours of installation time. RapidRun’s flexibility was important to our purchase decision because we were not sure at the time if we needed 3 or 5 RCA connections, and RapidRun allowed us to change if we needed to. The ability to quickly and easily install RapidRun was also attractive because it lowered our costs. The Configurator was great in helping us decide what parts we needed to purchase.” - K. Steil, Florida

"We purchased the RapidRun system for business purposes. Our end users are medical practitioners that require an image (from a PC) to be displayed on a monitor that is mounted on the wall. The PC can be located anywhere in these rooms. We use your RapidRun cables to connect the PC to these monitors. Our installation techs could NOT be happier with these RapidRun products. RapidRun's ability to change signal types was not a concern because we use it for VGA only and changing termination types is something we do not need to do. But our installations are always under a tight schedule and the faster installation RapidRun allows us is a great plus." - C. Combs, Ohio

"I purchased RapidRun [Component Video + S-Video] to connect video equipment near one wall to a projector near the opposite wall, via the basement ceiling beneath the floor. I am using the s-video connections, but I want the component video jacks to be available in case I change video equipment or projectors. The flexibility to easily change the connection if/when my needs change played a big role in my buying decision, and only having to run a single cable during installation was appealing to me. I was shopping specifically for this one item, and you had it with the features I needed.” - John K., Washington

For Further instructional resources on RapidRun, please Click Here!

Return to "Learn More About RapidRun™"